Before you place your freezer on the ground you need to know how to move it. You can do this by moving the freezer slowly forward and rocking it from one side to the other. It is important to be careful not to damage the floor when moving a freezer. To prevent damage, you can use furniture sliders. These sliders attach to your freezer’s front feet and allow it to slide forward, without causing any damage.
Using a dolly
To transport your freezer, you will need a dolly to lift it and stabilize it. To secure your freezer to the dolly, you can use a rope. Make sure that the freezer is in an upright position when putting it on the dolly, and that it is tilted so that the dolly is level.
A dolly is the safest way to move a large appliance, like a refrigerator or freezer. It is made of soft rubber wheels that won’t scratch the floor. You can have helpers pull the freezer for you while you use it. You can place furniture sliders underneath the legs of the dolly to balance it.
Before using a dolly to move your fridge, you should first secure it with moving straps. Once you have secured the fridge in the dolly, roll the dolly over the route. To avoid bumps and to help you guide it, have someone on each side.
You can use furniture blankets to protect a heavy freezer when you’re moving it. To slide the freezer off the wall, you can use furniture sliders. You should also secure padding blankets with packing tape. You can also use moving apps to plan your move and estimate the cost.
Avoid putting a freezer on its side while on a long trip
When you have an upright freezer, it is important to not place it on its side when you travel. This can cause it to lose its refrigerant. The liquid could also leak out and cause damage to the evaporative coils. It is best to place the freezer on its compressor side, and not on its side.
Another reason to avoid placing your freezer on its side during a long trip is to protect its working parts. If you move your freezer on its back, it could cause damage to the cooling pipes and radiator. The same rule goes for chest freezers. They should be placed on their side, rather than their backs. If you do move the freezer, make sure to unplug it after a few hours or 24 hours. If you wait too long, the refrigerant system could be damaged and your freezer may become damaged.
Tips for moving a full freezer
It can be difficult to move a full freezer. It can be difficult because freezers come with different sizes and designs. They are also often very heavy. Professional movers are needed to safely and efficiently move your freezer. However, you can also do it yourself if you have a friend or two willing to help you.
First, take the freezer from its refrigerator. It is advisable to unplug it a day or two before moving. It will remain safe for up to two days, but may begin to freeze three days later. Therefore, you should unplug the freezer and seal the doors before moving it.
It is also important to clean your deep freezer before moving it. There may be a water leak if the ice has melted. Melted ice can attract bacteria that thrives in warm climates. It is important to keep the freezer clean so that there are no unexpected water spillages during the move.
It is easy to defrost the freezer. It takes between six and eight hours. This gives you a chance to clean the freezer thoroughly and disinfect the drawers. Afterwards, you can put a disinfectant on the inside of the freezer to prevent damage.
After the freezer has cooled you can begin the process of moving it. If it is full, you will have to wait a couple of days before you can plug it in. The time you need to wait depends on the manufacturer of the freezer, but a general rule is at least 24 hours.